homi


email Romi Usa

click to login

Romi USA
1845 Airport Exchange Blvd.
Erlanger, Kentucky 41018
Telephone: 1-859-647-7566
Fax: 1-859-647-9122
Toll Free US / Canada 1-877-ROMIUSA




 

ROMI T 14

The Romi T series incorporates the latest innovations available in Manual Lathes. Many new features have been added to the Romi Manual Lathes that you have used for so many years into the 21 st century.

Features include:

  • One-piece cast, full length, well ribbed bed with extra depth
  • Automatic longitudinal disengagement.
  • Lead screw with backlash elimination
  • Induction hardened and ground bed guideways Rockwell 45c.
  • Hardened, ground gears.
  • Compound rest with T-slots.
  • Set of change gears for inch, Metric, Module, and Diametral Pitch threads.
  • Quick response, polar electromagnetic brake
  • Full length rear splash guard.
  • Front pull-out drawer-type chip pan.
  • End gearing door with locking knob and safety device to disconnect current when door is opened.
  • Apron incorporating one-shot manual operation pump for lubrication of bed and cross slide guide ways.
  • Graduated handwheel for longitudinal travel.
  • Tailstock quill with cast-in tang slot, graduated inches.
  • Duplicate emergency stop button on apron

ROMI  T 14

ROMI T 14

 

D1-4” Spindle Bore:                                  

  1  9/16”  

Spindle Speeds (12)                           

  50-2,500 RPM

Swing over Bed:                                          

13  7/8”

Swing over Cross Slide                          

  7  9/32”

Cross Slide Travel                                      

  7  7/8”

Top Slide Travel                                        

  3  15/16”

Bed Length-Longitudinal Travel           

20” / 40” / 60”

 Spindle Horsepower                                     

5 HP
 
HEADSTOCK

The headstock gears are alloy (Cr,Ni,Mo) steel, hardened and ground using Reishauer electronic gear grinders

The D1-4” Camlock spindle utilizes high precision, individually lubricated, Timken roller bearings

Oil bath lubrication prevents overheating and bearing failure

Spindle Center 3 MT, Taper 1:20

 

The large drive gear is located close to the spindle nose

Electromagnetic brake with automatic actuation and release

Single multi-ribbed vee belt to connect drive motor to headstock

The end gear door locks, and there is a safety disconnect when door opens

End gear set (steel) for 184 threads.

Inch, diametral pitch, metric and module threads can be cut with standard quadrant gear set

46 Inch threads can be cut with standard quadrant set from 4 to 36 TPI, includes 32 TPI.

BED

One cast piece, full length, well ribbed, with extra depth

Precision hardened and ground ways

Bed ways are induction hardened to >45  Rc

All way surfaces are ground in one set-up

Full length rear splash guard

Coolant system

Chip pan pulls out to the front so the lathe can be placed close to a wall

One shot lubrication system for bed and cross slide guideways

Prepared for the addition of a taper attachment in the field

CARRIAGE AND APRON

Large, easy to read, Inch/Metric dials

Automatic longitudinal disengagement, 4 position stop

Lead screw with Romi’s exclusive backlash elimination feature

Mechanical safety clutch on lead screw and shear pin on the feed rod to prevent serious damage when an accident occurs

Duplicate Emergency Stop Button on the Apron

Forward, reverse and stop control from apron lever

Thread chasing dial for inch or metric threads

Longitudinal feeds (36) .0013 IPR to .0277 IPR with standard end gears

Cross feeds (35) .0006 IPR to .0137 IPR with standard end gears

TAILSTOCK

Two piece for easy adjustment

Quill Travel 4 3/4”

Quill Diameter 1 3/4”

Quill Morse Taper 3 MT

Quill graduated Inch/Metric

Tang Stop and Tool Knockout

STANDARD EQUIPMENT
  • Chuck guard
  • Two 3 MT dead centers
  • Set of wrenches for machine operation
  • Set of leveling screws and nuts
  • Set of operation and parts manuals in English
  • Electrical system for connection to 230V, 3 phase, 60 Hz
  • 115V emergency stop button and control push buttons
Romi T 14 X 20”
Price On Request
Romi T 14 X 40” Price On Request
Romi T 14 X 60” Price On Request

FOB Erlanger, Kentucky

Terms of Payment are 20% with order
Balance due 30 days after shipment
Terms are subject to credit approval by Romi Machine Tools, Ltd.

View Romi Warranty

Machine Accessories  
X35782 Automatic Cross Feed Disengagement
Note: Cannot be used with DRO
 
X11819 Romi Drive Plate 7 1/2” diameter  
X11638 Romi T slotted Face Plate 11” diameter  
X11664 Micrometer Carriage Stop (0.001”) graduations  
X33489 Follow Rest with Bronze Tips 3/16-2” capacity  
X33491 Steady Rest Open with Bronze Tips 3/16-2” capacity  
X33949 Steady Rest closed with Rollers 5/16-4” capacity  
00113 Work Light  
X15294 Taper Turning Attachment 8 1/4” turning length  
  15 degree maximum angle  
S05301 Extra set of Operation and Parts Manuals  
  Electrics for 440V-480V or 600V  
  Metric Only Version – Special Order  
Live Center
10853 Royal 3 MT Live Center .0001” TIR  
X36965 Open Sided rear tool post with fixed base  
X12313 Square 4 position Tool Post w/Swivel base  
SDN30BXA Dorian Super Quick Change Tool Post Set Includes  
2-D30BXA1 Turn/Face Holder 1-D30BXA2 Turn/Face/Bore Holder  
1-D30BXA-4 Boring Bar Holder 1-D30BXA-7-71C Cutoff Holder  
1-D30BXA881 O.D./I.D. Threading  
QITP30N Dorian Quadra Tool Post Set Includes  
2-QITP30N-1 Turn/Face Holder 1-QITP30N-2 Turn/Face/Bore Holder  
1-QITP30N-4 Boring Bar Holder 1-QITP30N-7-71C Cutoff Holder  
1-QITP30N-881 O.D./I.D. Threading
Manual 3 Jaw Chucks  
 

Note: Bison Chucks are available, but are sold without warranty

 
Atlas 6” 3-Jaw Easy-Set Semi Steel Body Chuck with D1-4 mounting Plate and two piece jaws, 3,000 RPM
Atlas 8” 3-Jaw Easy-Set Semi Steel Body Chuck with D1-4 mounting Plate and two piece jaws, 2,800 RPM
   
PB50604

PBA 6” 3- Jaw Setrite Steel Body Chuck with D1-4 mounting Plate and two piece jaws

PB50804 -4 PBA 8” 3- Jaw Setrite Steel Body Chuck with D1 mounting Plate and two piece jaws
156789 Rohm 6” 3- Jaw Self Centering Hi-thru Steel Body with mounting plate and reversible top jaws
     
Manual 4 Jaw Chucks  
Atlas 8”

4-Jaw Independent Cast Iron Body Chuck direct mount with solid reversible jaws

 
814421 PBA 8” 4-Jaw Direct Mount Cast Iron Body Chuck with solid reversible jaws
101441 PBA 10” 4-Jaw Direct Mount Cast Iron Body Chuck with solid reversible jaws
023103 Rohm 8” 4- Jaw Cast Iron Body with D1-4 mounting plate and one piece jaws
   
     
     
 
     
home
www.romiusa.com