Structure: The base, column and headstock
are heavy duty Romi castings. They are well ribbed
for strength and vibration dampening. The castings are poured
in our own foundry to DIN 1691 standards.
Our foundry is ISO 9002 certified and has been since
1994.
The base casting
is designed so that chips will flow away from the work
area.
Guide ways: Linear Guide ways are used
on all axes.
Ball Screws: Ball screws are manufactured
and ground by Romi where complete control over the accuracy
and quality is insured. We are not dependent on commercially
available products. The double ball nuts are large in width
and diameter. The double nut design provides positive location
by mating with both flanks of the screw at all times. This
design also minimizes heat distortion. Thermal gauging or
temperature reduction systems are not required.
Lubrication: Automatic lubrication is standard.
The lubrication reservoir is in plain sight and is easy to
refill, but It is protected from accidental damage. The reservoir
has 1/2 gallon capacity.
Guarding: Romi uses 10 gauge, powder coated
steel for all external guarding. The door is easy to open
and close gliding on multiple rollers. The double overlappingseal
ensures that coolant remains in the cutting area, not on
your floor. A large safety window allows the operator to
monitor machine operations. A coolant flushing system is
standard to keep the work are free of chips.
Included as Standard
7.5 HP Variable Speed Spindle Motor
Spindle Taper BT 30
Automatic lubrication system with line filter
Automatic tool changer turret, 10 tool capacity
Coolant system 2.6 GPM @ 30 PSI, .75 HP Pump
Cover cleaning system using coolant with separate pump
Electrical Diagram
Electrical system operates on 230V, 3Ph, 50/60 Hz
Transformer 200-250 / 360-390 / 410-480V 50/60 HZ, 12.5 KVA
Fully enclosed work area with interlocked sliding safety door
Removable chip box
Sealed work light
Set of leveling screws and nuts
Set of operating, maintenance, programming, installation and parts manuals
Set of wrenches
GE-Fanuc control Series 21i-M with 10.4” color monitor
ROMI G-SERIES GE-Fanuc 21i-M Standard Equipment
English Language Display Background Editing
Canned Cycles for Drilling (G81-G86) Clock Function
Diagnostic Screen Custom Macro B (Parametric Programming)
Direct Input Drawing Dimensions External Message Ladder
Ladder Screen Visualization Inch/Metric Conversion
Linear, Circular & Helical Interpolation Local Coordinate System (G52)
Machine Coordinate System (G 53) Maintenance Alarms and History
Manual Handle Feed Part Program Storage 80M (approx.32K)
Reader/Punch Interface RS-232 PCMCIA Card Part Program Storage
Plane Selection (G17, G18 & G 19) Program Execute from Flash Card
Programmable Data Input (G 10) Rigid Tapping
Run Hour and Parts Count Display Special G codes (B and C)
Spindle Orientation (M19) Stored Programs (125)
Sub-Program Editing Tool Geometry Offset/ Wear Offsets (16)
Tool Life Management Tool Radius Compensation (G40-G42)
Work piece Coordinate System (G54-G59) Stored Pitch Error Compensation
Romi VTC 30 A - 8,000
RPM Vertical Milling, Drilling and Tapping Center
Romi VTC 30 B – 8,000 RPM Vertical Milling,
Drilling and Tapping Center
FOB Erlanger,
Kentucky
Terms of Payment
are 20% with order
Balance due 30 days after shipment
Terms are subject to credit approval by Romi Machine Tools, Ltd.
Click here to review:
ROMI MACHINE TOOLS, LTD.
TERMS AND CONDITIONS OF SALE AND LIMITED WARRANTY
GE-Fanuc 21i-T Optional Equipment
Part # Description Price
OPE01073 Mold & Die Romi Package.
Includes Pentium processor, tune-up parameters, AI nano
contour control, machining condition selection function,
bell shaped acc/dec after cutting feed interpolation,
rapid traverse bell shaped acc/dec, bell shaped acc/dec
before
look ahead interpolation.
S57960 Polar Coordinate Command
Machine Accessories
X40138-Automatic door attachment, air operated
with safety contact protection
X41013-Chip auger system, factory installed
only
OPC00554-Extra set of Romi operating,
maintenance, installation and parts manuals
X40142-Linear scales for X and Y axes,
factory installed only .
OPE01064-Linear scales for X, Y and
Z axes, factory installed only
X42510-Manual pallet changer (with
2 pallets 15.75” X 12.6”) .
X41018-Pneumatic chip cleaning system
for use during machining
Rotary table interface (4th axis), including servo drive for Fanuc servo motor
Beta 4/4000 IS A068-0063-B203, cables, connectors & pneumatic attachments
OPE00899- Oil Skimmer
X41019-Status indicator light with three
colors
X41001-Spindle cartridge 12 -12,000
RPM in place of standard
X41003-Through the spindle coolant,
100 PSI, factory installed only
X41006-Through the spindle coolant,
200 PSI, factory installed only
X41016-Wash gun
